2004 Ford Transit

Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Suspension component mounting prescribed area is corroded but not considered excessive n/s o/s inner and outer sills (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive n/s/r o/s/r chassis starting to corrode and rear valance has some surface corrosion (2.4.A.3)

o/s/r quarter bumper damaged slightly

Brake pad(s) wearing thin front 70% worn (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Suspension spring mounting prescribed area is corroded but not considered excessive n/s/r outer sill (2.4.A.3)

n/s/r tyre worn on inner edge slightly

o/s/f door mirror glass cracked

o/s/f slight noise from wheel when rotated

weld repairs heavily under sealed

exhaust corroded

Offside Front Brake pipe excessively corroded (3.6.B.2c)

exhaust corroded

weld repairs heavily under sealed

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

some corrosion to underside of chassis

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

some corrosion to underside of chassis

adv outer sills with some corrosion

adv underside of vehicle with some corrosion

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Front Exhaust has a major leak of exhaust gases (7.1.2)

Centre Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)