MOT Status
ExpiredMileage
119,239 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim not tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Exhaust system insecure (6.1.2 (a))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Seat belt not functioning as intended (7.1.2 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sub frame corroded all over (6.1.1 (c) (i))
exhaust cover loose and tatty.
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)
Rear Anti-roll bar linkage has slight play in a ball joint Both (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit 2.3mm (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin PARK & SERVICE BRAKE READINGS SLIGHTLY LOW ALSO POSS CALIPER ISSUE (3.5.1g)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit 2.7mm (4.1.E.1)
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
REAR EXHAUST MOUNTING BAR WEAK & CORRODED (PART OF EXHAUST)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
o/s/f tyre wearing on inner edge
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Offside Headlamp aim too high (1.8)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK04 HRJ is a 2004 Mazda 3 in Silver with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2004 Mazda 3 models, the average MOT pass rate is 73.9% with a typical mileage of 69,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CK04 HRJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 22 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK04 HRJ?
You can check the full history of CK04 HRJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK04 HRJ registered?
CK04 HRJ is a 2004 Mazda 3, first registered on 24 March 2004.
Is CK04 HRJ safe to buy?
The MOT history for CK04 HRJ shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK04 HRJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK04 HRJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.