2004 Fiat Scudo

Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Nearside Front Headlamp insecure (4.1.1 (c))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer will (7.1.1 (a) (i))

Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Crossmember rotten

Nearside Front Brake pipe corroded, covered in grease or other material X2 (1.1.11 (c))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive Inner arch (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive Inner arch (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Power steering fluid level below minimum (2.1.5 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Brake union (1.1.11 (c))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Brake union (1.1.11 (c))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front tyre wearing inner edge

Offside Front tyre wearing inner edge

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Suspension rod corroded but not seriously weakened panhard rod (5.3.3 (b) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Side repeater incorrect colour (4.4.3 (a))

Power steering fluid reservoir empty (2.1.5 (b) (ii))

Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front tyre wearing inner edge

Offside Front tyre wearing inner edge

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Suspension rod corroded but not seriously weakened panhard rod (5.3.3 (b) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Side repeater slightly discoloured (1.4.A.2f)

Nearside Rear sill damaged

Offside Front Side repeater slightly discoloured (1.4.A.2f)

Rear Brake load sensing valve stiff (3.6.E.3)

Rear Panhard rod corroded but not seriously weakened (2.4.G.1)

Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Rear Coil spring not correctly located (2.4.C.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front inner c.v gaitor leaking grease

Nearside Rear outer sill damaged just out side of prescribed area of axle to where the hole exists

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake load sensing valve stiff (3.6.E.3)

front tyres wearing on inner edge

oil cap missing

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

rear brake noisy

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)