2005 Honda Cbr 125 RS-5

Headlamp switch does not immediately illuminate all main beam headlamps Main beam only illuminates whilst switch is depressed. (4.1.3 (a))

Headlamp switch does not immediately illuminate all main beam headlamps Main beam only illuminates whilst switch is depressed. (4.1.3 (a))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Front Brake grabbing severely (1.2.1 (c))

Headlamp aim too low Too low on both bulbs (4.1.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front suspension stiff

Headlamp aim too high (4.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front suspension stiff

Drive chain worn but not considered excessive (6.2.1e)

Exhaust clamp missing

Exhaust noisy (7.1.2)

Handlebar end weights missing

Clutch lever bent (6.2.1g)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Handlebar deformed (2.1.1b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

Brake master cylinder fluid level low (3.2.B1d)

Drive chain slightly tight (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

l/h handle bar grip loose.

Direction indicators not working (1.5.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Brake master cylinder fluid level low (3.2.B1d)

Drive chain slightly tight (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

l/h handle bar grip loose.

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front brake requires a service