2006 Ford Focus

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Outer sill cover fitted

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Outer sill area

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Wearing on inner edge of tyre (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill area (6.1.1 (c) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Outer sill cover fitted

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Outer sill area

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Wearing on inner edge of tyre (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened All Rear (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e)) DANGEROUS

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

engine light on

nsf mirror glass missing

Nearside Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

engine light on

nsf mirror glass missing

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)