MOT Status
ExpiredMileage
71,427 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Front fog lamp not working
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Tyre worn close to legal limit/worn on edge all (5.2.3 (e))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Tyre worn close to legal limit/worn on edge all (5.2.3 (e))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Both front inner arches/chassis rails corroding
Power steering pipes corroding
Rear tyres low
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail/ wishbone mounting point (2.4.A.3)
Both front inner arches/chassis rails corroding
Power steering pipes corroding
Rear tyres low
Offside Headlamp aim too low (1.8)
Rear fog lamp not working (1.3.2b)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Tyre worn close to the legal limit Badly worn on the inner edge. (4.1.E.1)
Offside Headlamp aim too low (1.8)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK06 HWY is a 2006 Ford Ka in Black with a 1,599cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CK06 HWY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CK06 HWY?
You can check the full history of CK06 HWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK06 HWY registered?
CK06 HWY is a 2006 Ford Ka, first registered on 26 May 2006.
Is CK06 HWY safe to buy?
The MOT history for CK06 HWY shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK06 HWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK06 HWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.