MOT Status
ExpiredMileage
309,117 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm pin or bush worn but not resulting in excessive movement both front arms (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both front arms (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Lower Suspension arm ball joint dust cover severely deteriorated Track Control Arm (5.3.4 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Nearside Front wheel rim is damaged
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
bonnet struts weak
both front jacking points are missing
emissions too clean
Nearside Front All position lamps not working side (4.2.1 (a))
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear All position lamps not working side (4.2.1 (a))
Offside Front All position lamps not working side (4.2.1 (a))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear All position lamps not working side (4.2.1 (a))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front brake pads low & discs worn
Nearside Front wheel rim is damaged
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
bonnet struts weak
both front jacking points are missing
emissions too clean
Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Stop lamp not working (1.2.1b)
both ffront suspension arm bushes are worn
handbrake release damaged
sight knocking from front suspension
slight play in o/s/f drop link
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
both ffront suspension arm bushes are worn
handbrake release damaged
noise ffrom n/s/r wheel when spun
sight knocking from front suspension
slight play in o/s/f drop link
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
both wipers starting to split
Front Track rod end ball joint has slight play (2.2.B.1f)
Front Tyre worn close to the legal limit (4.1.E.1)
engine warning light on
orange front end line marker coming on with side lights.
slight oil leak from diff area.
Offside Front Front position lamp(s) not working (1.1.A.3b)
engine warning light on
orange front end line marker coming on with side lights.
slight oil leak from diff area.
front wipers slightly smearing.
How Reliable is the Chrysler-jeep 300?
Based on 115,793 MOT tests across 6,930 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK06 XDU is a 2006 Chrysler-jeep 300 in Black with a 2,987cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2006 Chrysler-jeep 300 models, the average MOT pass rate is 71.5% with a typical mileage of 79,241 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler-jeep 300 fails its MOT is parking brake: efficiency below requirements, accounting for 8,438 recorded failures. If you're considering buying CK06 XDU, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep 300 typically stays on UK roads for around 21 years. At 20 years old, this Chrysler-jeep 300 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK06 XDU?
You can check the full history of CK06 XDU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK06 XDU registered?
CK06 XDU is a 2006 Chrysler-jeep 300, first registered on 16 June 2006.
Is CK06 XDU safe to buy?
The MOT history for CK06 XDU shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK06 XDU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK06 XDU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.