MOT Status
ExpiredMileage
133,101 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush excessively worn Back bush (5.3.4 (a) (i))
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Centre exhaust clamp corroded
Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Back bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Exhaust mounting defective middle to rear (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened front sub frame,rear axle and rear coil springs (5.3.3 (b) (i))
Exhaust mounting defective middle and rear exhaust box outer skin corroded (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Suspension component corroded but not seriously weakened rear axle, rear coil springs,n/s/f coil spring (5.3.3 (b) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Exhaust mounting defective middle and rear exhaust box outer skin corroded (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Suspension component corroded but not seriously weakened rear axle, rear coil springs,n/s/f coil spring (5.3.3 (b) (i))
Exhaust mounting defective middle (6.1.2 (a))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear exhaust box outer skin corroded
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Exhaust mounting defective middle (6.1.2 (a))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear exhaust box outer skin corroded
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre has ply or cords exposed outer side wall (5.2.3 (d) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Inner Position lamp not working (4.2.1 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
rear brakes will need clean and ajusted
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Inner Tie bar/rod has excessive play in a pin/bearing (2.4.G.2)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
o/s/f inner rack end slight play
Nearside Front constant velocity joint is insecure (2.5.C.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear rear brake binding (3.7.B.1)
Offside Rear rear brake grabbing slightly (3.7.A.5b)
How Reliable is the Seat Ibiza?
Based on 3,964,856 MOT tests across 342,511 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK08 MVN is a 2008 Seat Ibiza in Black with a 1,896cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2008 Seat Ibiza models, the average MOT pass rate is 70.5% with a typical mileage of 67,484 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Seat Ibiza fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 119,614 recorded failures. If you're considering buying CK08 MVN, it's worth having these areas checked by a mechanic before committing.
The Seat Ibiza typically stays on UK roads for around 31 years. At 18 years old, this Seat Ibiza is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CK08 MVN?
You can check the full history of CK08 MVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK08 MVN registered?
CK08 MVN is a 2008 Seat Ibiza, first registered on 17 May 2008.
Is CK08 MVN safe to buy?
The MOT history for CK08 MVN shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK08 MVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK08 MVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.