2008 Ford Ka

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test air freshener ()

Offside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Spare tyre defective ()

Offside Stop lamp not working (1.2.1b)

Nearside Front Steering retaining device missing track rod end castle nut split pin (2.2.C.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Spare tyre defective ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive both inner wheel arches (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive floor panels (2.4.A.3)

Spare tyre defective ()

Spare tyre defective ()

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wheel arches (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive inner sills and chassis rails (2.4.A.3)

oil filter is rusty and leaking

Front Exhaust has a major leak of exhaust gases flexi pipe (7.1.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded wing around fuel cap (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner to outer sill (2.4.A.3)

Rear Exhaust system not adequately supported mounting is broken (7.1.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both inner wheel arches (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive floor panels (2.4.A.3)

Spare tyre defective ()

Spare tyre defective ()

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wheel arches (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive inner sills and chassis rails (2.4.A.3)

oil filter is rusty and leaking

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arches (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit worn to limit (4.1.E.1)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Tyre worn close to the legal limit both front tyres are heavily worn on inner edges almost through to canvas (4.1.E.1)

rear exhaust mounting is broken

spare tyre is defective

Nearside Front Subframe mounting prescribed area is excessively corroded floor panel (2.4.A.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arches (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit worn to limit (4.1.E.1)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Tyre worn close to the legal limit both front tyres are heavily worn on inner edges almost through to canvas (4.1.E.1)

rear exhaust mounting is broken

spare tyre is defective

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Spare tyre defective

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Spare tyre defective

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Spare tyre defective

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Spare tyre defective

ABS sensor lead insecure

Nearside Headlamp aim too low (1.8)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

ABS sensor lead insecure