2011 Fiat 500

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

rear axle beam corroded

Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Top bush or bearing has slight wear or free play

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Body mounting fixings insecure (6.2.2 (c) (i))

Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))

Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Top bush or bearing has slight wear or free play

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust has a major leak of exhaust gases exhaust back box (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

slight exhaust blow from mid to rear

Driver's door cannot be opened from outside the vehicle (6.2.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

slight exhaust blow from mid to rear

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Both front daytime running lamps inoperative

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering has slight play detected at steering column

Offside Rear Upper Suspension component pin or bush slightly worn shock absorber (5.3.4 (a) (i))

Nearside Rear Outer tyre wearing

Offside Front tyre wearing on edges and under3mm tread

Offside Rear tyre wearing thin on edges and close to 2mm tread

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Outer tyre wearing

Offside Front tyre wearing on edges and under3mm tread

Offside Rear tyre wearing thin on edges and close to 2mm tread

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Stop lamp not working (1.2.1b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)