2013 Peugeot 208

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases front and rear join (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened offside and nearside, inner surfaces (1.1.14 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Emissions unable to be completed (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

OSF DAYTIME D/LIGHT INOP,,P3,,185/65/15 X 4,,,,

Driver's door cannot be opened from inside the vehicle (6.2.3 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

OSF DAYTIME D/LIGHT INOP,,P3,,185/65/15 X 4,,,,

Rear axle corroded

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear axle corroded

Front Oil leak, but not excessive Drive shaft seals (8.4.1 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Wish bone (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn Wish bone rear bush (5.3.4 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Oil leak, but not excessive Drive shaft seals (8.4.1 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Wish bone (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush on near and offside slightly deteriorated (5.3.4 (a) (i))

Manufacturers rear suspension covers fitted restricting inspection of components

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Driver's view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush on near and offside slightly deteriorated (5.3.4 (a) (i))

Manufacturers rear suspension covers fitted restricting inspection of components

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front day running light not working

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Exhaust mounting defective (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front day running light not working

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Nail in tyre ()

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front front parking (secondary) brake grabbing slightly (3.7.B.6b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear exhaust bracket snapped

Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

rear exhaust bracket snapped still supported