2013 Peugeot 208

Coil spring corroded both rear (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Coil spring corroded both rear (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Offside Front Brake pad(s) wearing thin outer (1.1.13 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Coil spring corroded both rear (5.3.1 (b) (i))

Offside Front Brake pad(s) wearing thin outer (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement n/s/f and o/s/f wishbones (5.3.4 (a) (i))

Nearside Headlamp insecure (4.1.1 (c))

Rear Exhaust silencer insecure mount snapped (8.1.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement n/s/f and o/s/f wishbones (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Emissions not tested (8.2.2.2 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

eml light on

rear exhaust bracket corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

eml light on

rear exhaust bracket corroded

Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)