2015 Citroen C4

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced outer sill damadged (6.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm 205/60/16 (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced outer sill damadged (6.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear outer door skin dented and slight dent to body structure

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear outer door skin dented and slight dent to body structure

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))

Emissions unable to be completed (8.2.2.2 (e))

Offside Front Tyre tread depth below requirements of 1.6mm 205/60x16 worn to chords (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge worn 205/60/16 (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

no acceleration detected(no printout)

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

no acceleration detected(no printout)

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both tyres (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge both tyres (5.2.3 (e))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to the legal limit 2.5mm (4.1.E.1)