2003 Peugeot 206

exhaust blow front joint

exhaust blow rear joint

oil leak

rear metal brake pipe corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside inner rack joint/rack has wear/ movement

Offside Rear bump stop missing

Offside inner rack joint/rack has wear/ movement

Oil leak ()

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Nearside inner rack joint/rack has wear/ movement

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear bump stop missing

Offside Side repeater slightly discoloured (1.4.A.2f)

Offside inner rack joint/rack has wear/ movement

Oil leak ()

Front Exhaust has a minor leak of exhaust gases exhaust blow front pipe (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear suspension bush on lower wishbone worn (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear suspension bush worn on lower wishbone (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

fuel tank strap in poor condition

Windscreen has a combination of minor damage areas which restrict the drivers view (8.3.1c)

Front Exhaust has a minor leak of exhaust gases exhaust blow front pipe (7.1.2)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear suspension bush on lower wishbone worn (2.4.G.2)

Offside Front Headlamp aim too high (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear suspension bush worn on lower wishbone (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre has ply or cords exposed outer tread perished (4.1.D.1b)

fuel tank strap in poor condition

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

offside front rack arm play

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Steering column movement between the shaft and steering wheel (2.1.2b)

offside front rack arm play

Exhaust has part of the system slightly deteriorated (7.1.1a)

Steering column top bearing slightly worn (2.1.2c)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

airbag light on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim too low (1.6.D2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too low (1.6.D2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)