2002 Subaru Forester

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

front shock absorbers slightly corroded

suspension components generally have slight corrosion

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

front shock absorbers slightly corroded

suspension components generally have slight corrosion

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake binding slightly?

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear registration plate insecure (6.3.1b)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front brakes binding slightly.

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Towbar retaining device missing (6.6.3a)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Towbar retaining device missing (6.6.3a)

cill covers fitted - unable to inspect cills fully.

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

cill covers fitted - unable to inspect cills fully.

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in nearside front tyre

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)