2003 Ford Transit

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Bonnet primary retaining device ineffective bonnet not opening, under bonnet checks not carried out (3.1 (c))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (under doorstep) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension strut upper mount ( 3 separate areas) (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Electrical wiring likely to touch hot or rotating parts front of engine (4.11 (a) (iii)) DANGEROUS

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both centre and rear brake pipes slightly corroded

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Seat belt anchorage prescribed area is excessively corroded both front inner sills (5.2.6)

Suspension component mounting prescribed area is excessively corroded offside and nearside rear crossmember (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded offside and nearside rear outriggers (2.4.A.3)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

both front tyres are low

vehicle is undersealed

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

both front tyres are low

corrosion is present to most of the underside of the vehicle

o/s/f outer cv boot has signs of grease seepage but still functional

corrosion is present to all chassis/sill/floor areas

track rod end and ball joint rubbers are slightly damaged

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

corrosion is present to all chassis/sill/floor areas

track rod end and ball joint rubbers are slightly damaged

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear brake juddering severely (3.7.A.5b)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Brake cable has restricted free movement (3.5.1k)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear registration plate deteriorated (6.3.1d)

Windscreen chipped within swept area.

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Registration plate lamp not working (1.1.5c)

Windscreen chipped within swept area.

Front Fuel system component leaking (7.2.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Registration plate lamp not working (1.1.5c)