MOT Status
ExpiredMileage
119,282 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All suspension components corroded
Items removed from driver's view prior to test ()
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
All suspension components corroded
Items removed from driver's view prior to test ()
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened in to out arms x 2 (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened in to out arms x 2 (5.3.3 (b) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Suspension component mounting repair covered in underseal outer sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake pipe excessively corroded x 2 front to rear under bonnet (1.1.11 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel Pipe/s corroded fill & vent ()
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced under bonnet (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened attached arms also corroded (5.3.3 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened attached arms also corroded (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Valve stem slightly damaged valve perished (5.2.3 (j))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Valve stem slightly damaged valve perished (5.2.3 (j))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front coil spring corroded both sides (2.4.C.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Exhaust system not adequately supported (7.1.1)
Front coil spring corroded both sides (2.4.C.1b)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Both Rear Tyres Slightly Out Of Shape
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK53 MYD is a 2003 Ford Focus in Grey with a 1,596cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2003 Ford Focus models, the average MOT pass rate is 71.1% with a typical mileage of 70,585 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying CK53 MYD, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 23 years old, this Ford Focus is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK53 MYD?
You can check the full history of CK53 MYD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK53 MYD registered?
CK53 MYD is a 2003 Ford Focus, first registered on 26 November 2003.
Is CK53 MYD safe to buy?
The MOT history for CK53 MYD shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK53 MYD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK53 MYD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.