2004 Ford Focus C-max

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Battery insecure (1.9.1)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Coil spring not correctly located (2.4.C.2)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Tyre worn close to the legal limit (4.1.E.1)

Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear coil spring corroded (2.4.C.1b)

uneven front tyre wear

Both headlights faded

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

injector leaking in engine bay

Inner Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

injector leaking in engine bay

Nearside Headlamp insecure (1.7.3)

Nearside Front coil spring fractured (2.4.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

O/s wiper blade worn

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)