MOT Status
ExpiredMileage
99,208 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake actuating linkage mounting prescribed area is excessively corroded (1.1.21 (e) (i))
Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced fuel filler cap area (7.1.1 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength driver floor (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength forward mount area (5.3.6 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge 2.8mm (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 3.5mm (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive around fuel filler area (5.2.6)
underside of vehicle surface corrosion
Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive around fuel filler area (5.2.6)
underside of vehicle surface corrosion
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Offside Front coil spring broken (2.4.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole inner rear sill (6.1.B.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
some surface corrosion on underside advise.
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK56 ORL is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CK56 ORL, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CK56 ORL?
You can check the full history of CK56 ORL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK56 ORL registered?
CK56 ORL is a 2006 Ford Ka, first registered on 27 October 2006.
Is CK56 ORL safe to buy?
The MOT history for CK56 ORL shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK56 ORL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK56 ORL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.