2006 Honda Sh 125-6

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component excessively bent (Bottom Yoke or Fork Tubes Bent. Wheel Fouling Fairing When Brakes Applied) (2.3.1)

Steering headbearing has excessive free play (2.2.2)

Steering lock stop ineffective L/H Lock (2.1.3)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Throttle operating incorrectly (Throttle Sticks on R/H Lock) (6.2.1f)

Front Tyre worn close to the legal limit (4.1.3(ii))

Motorcycle structure slightly corroded front and rear (6.1.1a)

Brake lever has inadequate reserve travel rear (3.1.3b)

Front suspension has a modification which reduces the strength of a load bearing member or its supporting structure. front chassis head stock filled with metal filler (2.3.8)

Headlamp aim too high and too far to the right. not in line when wheels pointing forward (1.6)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not illuminate immediately a brake applies not working off front or rear switch (1.3.1a)

Motorcycle structure slightly corroded front and rear (6.1.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

seat ripped

Front Front wheel bearings have excessive free play (2.3.5b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Rear suspension component slightly corroded. (2.4.A.1a)

Offside Rear suspension component slightly corroded. (2.4.A.1a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Steering headbearing has excessive free play (2.2.2)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Rear suspension component slightly corroded. (2.4.A.1a)

Offside Rear suspension component slightly corroded. (2.4.A.1a)

mirrors damaged

speedo cable damaged

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Motorcycle structure slightly corroded (6.1.1a)

Rear Motorcycle structure slightly corroded (6.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))