MOT Status
ValidMileage
153,109 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake servo corroded.
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Rear suspension corroded but not weaken the strength of the car.
Horn not working (7.7 (a))
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake servo corroded.
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Rear suspension corroded but not weaken the strength of the car.
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
brake servo corroded
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Spare wheel carrier insecure Corroded. (6.1.5 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
brake servo corroded
Items removed from driver's view prior to test ()
brake servo corroded
under body heavy corrosion
Brake performance unable to be tested due to condition of brakes (1.2.1 (g))
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions unable to be completed exhaust (8.2.1.2 (d))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Horn not working (7.7 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Rear Registration plate inscription illegible (0.1 (b))
Offside Rear Brake pad(s) less than 1.5 mm thick METAL (1.1.13 (a) (ii)) DANGEROUS
Items removed from driver's view prior to test ()
brake servo corroded
under body heavy corrosion
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
underside of vehicle surface corrosion
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Registration plate lamp insecure (4.7.1 (c) (i))
rear suspension components covered in underseal
Horn not working (7.7 (a))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Registration plate lamp insecure (4.7.1 (c) (i))
rear suspension components covered in underseal
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened very close to limit (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement very close to limit (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened very close to limit (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Sub-frame corroded but not seriously weakened rear very close to limit (5.3.3 (b) (i))
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement very close to limit (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened very close to limit (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement very close to limit (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened very close to limit (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Sub-frame corroded but not seriously weakened rear very close to limit (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis (5.3.6 (a) (i))
Horn not working (7.7 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Exhaust system insecure (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened and offside front (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened and offside front (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis (5.3.6 (a) (i))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Horn not working (1.6.2a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Rear Shock absorber has a serious fluid leak (2.7.3) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Items removed from driver's view prior to test
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK57 BSV is a 2007 Mazda 3 in Silver with a 1,999cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CK57 BSV, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK57 BSV?
You can check the full history of CK57 BSV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK57 BSV registered?
CK57 BSV is a 2007 Mazda 3, first registered on 29 September 2007.
Is CK57 BSV safe to buy?
The MOT history for CK57 BSV shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK57 BSV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK57 BSV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.