2007 Honda Fr-v

Front Suspension component corroded but not seriously weakened on both sides (5.3.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component corroded but not seriously weakened both sides (5.3.3 (b) (i))

Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Suspension component corroded but not seriously weakened on both sides (5.3.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front sides (5.3.4 (a) (i))

Nearside Outer Integral body structure is repaired but structural rigidity is not significantly reduced sill (6.1.1 (d) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Outer Integral body structure is repaired but structural rigidity is not significantly reduced Sill (6.1.1 (d) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Outer Integral body structure is repaired but structural rigidity is not significantly reduced Sill (6.1.1 (d) (i))

Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both side sills (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both side chassis (6.1.1 (c) (i))

Front Position lamp not working Both (4.2.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both side sills (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both side chassis (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Macpherson strut modified but not seriously weakened (5.3.3 (c) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Stop lamp(s) all not working (4.3.1 (a) (iii))

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is distorted but not considered excessive outer sill (5.2.6)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint close (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Headlamp aim too low (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is distorted but not considered excessive outer sill (5.2.6)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint close (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Items removed from driver's view prior to test

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

all front ball joint dust covers deteriorating

centre rear stop not working/disconnected?

nearside outer sill dented

offside front tyre sidewall damage

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nearside outer sill damaged/dented

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

nearside outer sill damaged/dented

Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)