MOT Status
ExpiredMileage
131,465 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
under seal all underneath
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & floor (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened & susp (5.3.3 (b) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened & susp components (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Nail in tyre ()
Offside Rear Nail in tyre ()
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Nail in tyre ()
Offside Rear Nail in tyre ()
Road wheel fixing missing X4 one from each wheel / Locking wheel nut's removed (5.2.1 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Front Tyre worn close to legal limit/worn on edge both worn on the inner edges (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge worn on the inner edge (5.2.3 (e))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Tyre worn close to legal limit/worn on edge both worn on the inner edges (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge worn on the inner edge (5.2.3 (e))
Exhaust has a minor leak of exhaust gases (7.1.2)
Electronic stability system warning lamp indicates a fault (3.4.1c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm inner edge (4.1.E.1)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Under-trays fitted obscuring some underside components
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK58 AJX is a 2008 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CK58 AJX, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK58 AJX?
You can check the full history of CK58 AJX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK58 AJX registered?
CK58 AJX is a 2008 Mazda 3, first registered on 23 September 2008.
Is CK58 AJX safe to buy?
The MOT history for CK58 AJX shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK58 AJX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK58 AJX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.