2009 Fiat 500

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear exhaust box corroded

Bracket snapped on center exhaust and clamp missing from center to rear joint.

N/S/R tyre sidewall starting to crack.

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

O/S/R tyre inner sidewall damaged, no cords exposed.

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Bracket snapped on center exhaust and clamp missing from center to rear joint.

N/S/R tyre sidewall starting to crack.

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

O/S/R tyre inner sidewall damaged, no cords exposed.

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Central Rear Exhaust system corroded and deterioated

Front Exhaust support bracket corroded

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component pin or bush slightly worn Shock absorber bush (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component pin or bush slightly worn Shock absorber bush (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Service brake application uneven offside rear low (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened Axle has surface corrosion (5.3.3 (b) (i))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust system rusty

outer covering rear exhaust box corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm showing cords on inner edge (4.1.E.1)

Offside Lower Front suspension has excessive play in an outer ball joint and dust cover split (2.5.B.2a) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

exhaust system rusty

outer covering rear exhaust box corroded

Nearside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Nearside Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

both front tyres worn on inner edges

rear silencer deteriorated

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Nearside Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

both front tyres worn on inner edges

rear silencer deteriorated

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

offside front tyre worn on inner edge

rear silencer deteriorated