MOT Status
ExpiredMileage
116,343 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Horn not working (7.7 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Brake fluid warning lamp illuminated (1.1.10 (f))
Brake pedal pivot slightly tight (1.1.1 (a))
Nearside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Brake servo defective or ineffective (1.1.10 (a) (i))
Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii))
Horn not working (7.7 (a) (ii))
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Bumper insecure (6.1.4 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the BMW 316?
Based on 1,210,990 MOT tests across 108,989 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CKH 847X is a 1981 BMW 316 in Blue with a 1,766cc petrol engine. This vehicle has been through 6 MOT tests with a personal pass rate of 50%.
Across all 1981 BMW 316 models, the average MOT pass rate is 62.3% with a typical mileage of 85,797 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 316 fails its MOT is brake pipe excessively corroded, accounting for 71,150 recorded failures. If you're considering buying CKH 847X, it's worth having these areas checked by a mechanic before committing.
The BMW 316 typically stays on UK roads for around 38 years. At 45 years old, this BMW 316 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CKH 847X?
You can check the full history of CKH 847X by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CKH 847X registered?
CKH 847X is a 1981 BMW 316, first registered on 1 August 1981.
Is CKH 847X safe to buy?
The MOT history for CKH 847X shows 6 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CKH 847X have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CKH 847X. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.