2013 Ford S-max

Nearside Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

exhaust joints corroded

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Nearside Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin borderline (1.1.13 (a) (ii))

Rear Coil spring corroded both (5.3.1 (b) (i))

exhaust joints corroded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 1.9mm (5.2.3 (e))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps x2 (4.7.1 (b) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 1.9mm (5.2.3 (e))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2.6mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust heat shield insecure

o/s/f tyre wall slight damage

rear exhaust brkt broken but system secure

Nearside Front Tyre worn close to legal limit/worn on edge 2.6mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp aim too low and too far to the right. (4.1.2 (a))

exhaust heat shield insecure

o/s/f tyre wall slight damage

rear exhaust brkt broken but system secure

Registration plate inscription illegible front and rear C lettering can be seen and misread as an E lettering due to plate fixing point plastic covers been wrong colour (0.1 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)