2002 Subaru Impreza

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel arch (2.4.A.3)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Wheel arch (2.4.A.3)

Offside Rear Passenger's seat insecure (6.2.A.1)

Rear Registration plate lamp not working Both (1.1.C.1d)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel arch (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

sill covers fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

sill covers fitted

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

front brake fluctuating, but not excessively (3.7.B.3)

sill covers fitted

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Headlamp aim too far to the right (1.8)

Nearside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

front brake fluctuating, but not excessively (3.7.B.3)

sill covers fitted

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Battery insecure (1.9.1)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Items removed from driver's view prior to test

engine management warning light on

sill covers fitted

Emissions not tested (7.0)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

sill covers fitted

Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front front brake application uneven (3.7.B.2)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Shock absorber has a light misting of oil (2.7.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Shock absorber has a light misting of oil (2.7.3)

advise both rear shock dust covers broken

advise front pads close to warning strips

advise offside front tyre worn on inner edge

All position lamps not working (1.1.A.3b)

Registration plate lamp not working (1.1.5c)

advise both rear shock dust covers broken

advise front pads close to warning strips

advise offside front tyre worn on inner edge

Battery insecure

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

engine management light on dash

Front registration plate not displaying a BSAU 145d marking (6.3.3b)

Front registration plate not displaying the name of the supplying outlet (6.3.3a)

Front registration plate not displaying the postcode of the supplying outlet (6.3.3a)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Rear registration plate not displaying a BSAU 145d marking (6.3.3b)

Rear registration plate not displaying the name of the supplying outlet (6.3.3a)

Rear registration plate not displaying the postcode of the supplying outlet (6.3.3a)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

Battery insecure

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Battery insecure

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

engine management light on

nearside front outer light unit slight play

Brake performance not tested (3.7.A.1)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Inner Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear registration plate insecure (6.3.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

both front brake discs are worn

both rear drop link bushes upper/lower worn

engine management light is on

front offside tyre badly worn inner shoulder

travel on parking brake lever