MOT Status
ExpiredMileage
152,931 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fuel tank insecure (7.2.1)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Battery insecure (1.9.1)
Brake load sensing valve seized (3.6.E.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
nearside rear tyre flat
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Steering system excessively rough (2.2.D.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Light stalk feels loose.
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear number plate lens missing
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Mechanical brake component has restricted free movement (3.5.1k)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake discs very pitted and worn.
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Upper Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear rear brake binding (3.7.B.1)
Rear Parking brake lever has no reserve travel (3.1.6b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Advised dampness at nearside rear wheel back plate
Advised fuel tank strap corroding
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front coil spring incomplete (2.4.C.1a)
Advised dampness at nearside rear wheel back plate
Advised fuel tank strap corroding
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Advised Fuel tank strap corroding
Advised nearside wiper blade deteriorating
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Stop lamp not working (1.2.1b)
Parking brake lever has no reserve travel (3.1.6b)
Front Brake pad(s) wearing thin (3.5.1g)
Advisory note set out at initial test.
Nearside Headlamp aim too high (1.8)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Valve stem seriously damaged (4.1.D.1e)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Spare tyre insecure
Centre Rear fog lamp not working (1.3.2b)
Nearside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CN02 UWV is a 2002 Peugeot 206 in Black with a 1,398cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 47.1%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying CN02 UWV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CN02 UWV?
You can check the full history of CN02 UWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CN02 UWV registered?
CN02 UWV is a 2002 Peugeot 206, first registered on 8 April 2002.
Is CN02 UWV safe to buy?
The MOT history for CN02 UWV shows 17 tests with a 47.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CN02 UWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN02 UWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.