2003 Peugeot 206

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater incorrect colour (1.4.A.2f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

o\s\f tyre small cut in sidewall

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Outer Front constant velocity joint is insecure (2.5.C.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage seized (3.6.E.3)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

o\s\f tyre small cut in sidewall

Emissions not tested (7.0)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear brake application uneven (3.7.B.2)

Items removed from driver's view prior to test

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Nearside Side repeater not working (1.4.A.2c)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

slight discolouring to rear number plate

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

slight discolouring to rear number plate

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage slightly distorted (2.4.G.1)

Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Brake pad(s) wearing thin (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)