2005 Ford Focus C-max

Central Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Headlamp lens seriously defective both (4.1.1 (b) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Tyre has ply or cords exposed both (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Tyre has ply or cords exposed both (4.1.D.1b)

Front position lamp(s) not working both (1.1.A.3b)

Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Tyre tread depth below requirements of 1.6mm 205/55/16 (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm 205/55/16 (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive sills both sides (2.4.A.3)

Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Headlamp aim beam image obviously incorrect both sides (1.8.A.1b)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive chassis both sides (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)

Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

nail in nearside front tyre

Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust system not adequately supported (7.1.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)