CarVerify

Free Car Check

CN06 PYB

2006 Ford Ka

Red Petrol 1299cc
Search another vehicle

MOT Status

Expired
Expires11 Oct 2018
Tests18 (9 pass, 9 fail)
Pass rate50%

Mileage

85,486 mi
Last recorded85,486 miles
Recorded on8 Oct 2018
Typical for 2006 Ford Ka42,791 mi

Significantly above average — investigate

4 checks still locked for this Ford
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationCN06 PYB
MakeFord
ModelKa
Year2006
ColourRed
Fuel typePetrol
Engine1,299cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

9 pass 9 fail
Fail 8 Oct 2018 85,486 miles

Emissions not tested (8.2.1.2 (d))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREA HOLED > (7.1.1 (a) (i))

Nearside Rear Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded WHEEL ARCH HOLED NEXT TO BRAKE FLEXI MOUNTING (1.1.21 (e) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL HOLED. (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill .holed . (5.3.6 (a) (i))

Offside Headlamp aim too high and too far to the right. (4.1.2 (a))

Offside Rear Exhaust has a major leak of exhaust gases tail box . (6.1.2 (a))

Offside Rear Exhaust system insecure tail box . (6.1.2 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill . holed . INNER .OUTER & END OF SILL HOLED (5.3.6 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner boot floor . and end of CHASSIS HOLED (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CASTLEATION .FOR SUBFRAME HOLED (5.3.6 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Pass 22 Sep 2017 74,081 miles

Offside Front Lower STEERING COLUMN .LOWEST UJ . SLIGHT PLAY .

Fail 18 Sep 2017 74,079 miles

Offside Front Lower Subframe mounting prescribed area is excessively corroded outer sill holed . (2.4.A.3)

Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded rear seat mounting area holed . (5.2.6)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded in boot . rear inner shock mounting area holed .. (2.4.A.3)

COOLANT LEVEL LOW.

Offside Front Lower STEERING COLUMN .LOWEST UJ . SLIGHT PLAY .

Pass 12 Oct 2016 65,167 miles

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock monting (2.4.A.3)

Fail 10 Oct 2016 65,167 miles

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock monting (2.4.A.3)

Pass 12 May 2016 60,976 miles
Fail 26 Apr 2016 60,950 miles

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a track control arm inner bush (2.5.B.2b)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Pass 22 Jan 2015 56,174 miles

Brake vacuum pipe slightly chafed (3.6.C.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion nearside + offside front inner arches

corrosion nearside front sub frame mounting

corrosion offside rear inner sill to chassis

heavy corrosion to nearside + offside outer sills

offside head light mounting damaged

spare wheel missing

Fail 22 Jan 2015 56,174 miles

Nearside Stop lamp not working (1.2.1b)

Brake vacuum pipe slightly chafed (3.6.C.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

corrosion nearside + offside front inner arches

corrosion nearside front sub frame mounting

corrosion offside rear inner sill to chassis

heavy corrosion to nearside + offside outer sills

offside head light mounting damaged

spare wheel missing

Pass 13 Jan 2014 51,320 miles

corrosion nearside + offside front inner arches to sub frame mountings

corrosion to nearside + offside rear inner sill to chassis

corrosion to offside outer sill

nearside + offside front wishbone bushes starting to deteriorate

spare wheel missing

Fail 13 Jan 2014 51,320 miles

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

clutch hydraulic pipe is damp

corrosion nearside + offside front inner arches to sub frame mountings

corrosion to nearside + offside rear inner sill to chassis

corrosion to offside outer sill

nearside + offside front wishbone bushes starting to deteriorate

nearside front wheel arch trim insecure

offside front inner arch guard insecure

offside rear tyre was down to 18psi

spare wheel missing

travel on parking brake

Pass 16 Jan 2013 46,504 miles

Brake vacuum pipe slightly chafed (3.6.C.1b)

Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

both rear tyres are cracked

corrosion n/s front inner arch

n/s + o/s front wishbone/rear bushes starting to unbond

Fail 16 Jan 2013 46,504 miles

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake vacuum pipe slightly chafed (3.6.C.1b)

Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

both rear tyres are cracked

corrosion n/s front inner arch

n/s + o/s front wishbone/rear bushes starting to unbond

Pass 30 Sep 2011 41,476 miles
Pass 27 Aug 2010 38,795 miles

both front suspension wishbone rear bushes are starting to unbond

drivers seat backrest tilt cable is broken

rear wiper arm return spring is missing

spare wheel is missing

vin plate missing from under bonnet

Fail 27 Aug 2010 38,795 miles

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

both front suspension wishbone rear bushes are starting to unbond

drivers seat backrest tilt cable is broken

offside front wheel arch liner is insecure

offside rear sidelight bulb is dull

offside washer jet partially blocked

rear wiper arm return spring is missing

spare wheel is missing

vin plate missing from under bonnet

Pass 20 Aug 2009 35,005 miles
Fail 8 Jul 2009 34,926 miles

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Front brake disc excessively scored (3.5.1h)

Front registration plate deteriorated (6.3.1d)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp flickers when tapped lightly by hand (1.1.5e)

Offside Front Steering system has a road wheel fouling a part of the vehicle (2.2.D.2a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Dashboard lights inop

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

How Reliable is the Ford Ka?

Based on 8,818,307 MOT tests across 675,715 vehicles.

69.1%
Pass Rate
4,496
Miles/Year
29
Year Lifespan
675,715
On UK Roads

Top MOT Failure Points

Suspension component mounting prescribed area is excessively corroded 404,005
Seat belt anchorage prescribed area is excessively corroded 371,413
Tyre tread depth below requirements of 1.6mm 361,801
Suspension arm rubber bush deteriorated resulting in excessive movement 270,876
Windscreen wiper does not clear the windscreen effectively 263,812
Full Ford Ka reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

CN06 PYB is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.

Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CN06 PYB, it's worth having these areas checked by a mechanic before committing.

The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.

Frequently Asked Questions

How do I check the history of CN06 PYB?

You can check the full history of CN06 PYB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was CN06 PYB registered?

CN06 PYB is a 2006 Ford Ka, first registered on 18 December 2006.

Is CN06 PYB safe to buy?

The MOT history for CN06 PYB shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does CN06 PYB have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN06 PYB. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.