MOT Status
ExpiredMileage
101,145 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance unable to be tested (1.2.1 (g))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Nearside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
*in my view this car is dangerous for road use*
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside sill has light corrosion
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside wheel arch (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch marked yellow (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch marked yellow (5.3.6 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front bumper support very corroded
Items removed from driver's view prior to test ()
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside wing door step and body around fuel cap corroded
both sills corroded corrosion on under side
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing buy sill (5.3.6 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front bumper support very corroded
Items removed from driver's view prior to test ()
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside wing door step and body around fuel cap corroded
both sills corroded corrosion on under side
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
corroded around fuel filler
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
corroded around fuel filler
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
front discs worn
Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
front discs worn
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CN06 SYJ is a 2006 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CN06 SYJ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CN06 SYJ?
You can check the full history of CN06 SYJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CN06 SYJ registered?
CN06 SYJ is a 2006 Ford Ka, first registered on 30 April 2006.
Is CN06 SYJ safe to buy?
The MOT history for CN06 SYJ shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CN06 SYJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN06 SYJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.