MOT Status
ExpiredMileage
81,500 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))
Offside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis inner wheel arch (5.3.6 (a) (ii)) DANGEROUS
Body has slight corrosion undercarriage (6.1.B.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Inner Body has slight corrosion wheel arch (6.1.B.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Stop lamp not working (1.2.1b)
Body has slight corrosion undercarriage (6.1.B.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Inner Body has slight corrosion wheel arch (6.1.B.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Steering column universal joint has slight play (2.1.5)
Brake fluid warning lamp illuminated (3.6.G.2)
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Speedometer cannot be illuminated. (6.7.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
corrosion around fuel cap
o/s and n/s front discs worn
corrosion around fuel cap
o/s and n/s front discs worn
Nearside Front Lower Bonded suspension unit attachment corroded but not seriously weakened (2.4.F.1c)
Offside Front Lower Bonded suspension unit attachment corroded but not seriously weakened (2.4.F.1c)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CN06 WNX is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CN06 WNX, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CN06 WNX?
You can check the full history of CN06 WNX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CN06 WNX registered?
CN06 WNX is a 2006 Ford Ka, first registered on 1 March 2006.
Is CN06 WNX safe to buy?
The MOT history for CN06 WNX shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CN06 WNX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN06 WNX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.