2007 Piaggio Vespa

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Steering operation fouling on the fuel tank or bodywork on full lock Steering stop on the right hand side is not preventing the steering from going past its safe limit. (2.1.4 (b))

Central Lower Motorcycle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake cable worn, but not excessively (1.1.15 (b))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front suspension has inadequate damping effect. (2.3.6c)

Headlamp aim beam image kick up to the offside faulty lens (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering lock stop ineffective (2.1.3)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering linkage has slight free play (2.2.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1a)

acident damage