2008 Iveco Daily

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Rear brake pads very hard to see due to twin wheels

existing welding repairs ok

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch near cab mount (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Rear brake pads very hard to see due to twin wheels

existing welding repairs ok

handbrake performance just met and handbrake travel

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside inner body corrosion

Offside inner body corroded

Horn not working (7.7 (a))

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside inner body corrosion

Offside inner body corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Horn not working properly (7.7 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

corrosion on lower suspension arms

Emissions not tested (7.3.A.1)

Exhaust system not adequately supported (7.1.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

corrosion on lower suspension arms

Brake fluid warning lamp illuminated (3.6.G.2)

Front Electrical wiring damaged, likely to cause a short by steering rack u/j (1.9.2b)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Leaf spring anchor bracket loose (2.4.B.6a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Exhaust system not adequately supported (7.1.1)

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Braking system leaking caliper (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. brake test not done due to defects in system (3.7.B.5b)

Rear Brake lining(s) less than 1.5 mm thick (3.5.1g)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Lower Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Front Lower Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

exhaust mountings worn

Rear Brake pad(s) wearing thin (3.5.1g)

rear brake discs wearing thin