2015 Peugeot Boxer

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides front (n/s/f,o/s/r) (5.3.4 (a) (i))

Front Shock absorbers has light misting of oil both sides front (n/s/f,o/s/r) (5.3.2 (b))

Front engine oil sump corroded

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both disc rear (n/s/r,o/s/r) (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both disc in front (1.1.14 (a) (ii))

Front engine oil sump slightly corroded

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge edge slight worn (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge 2.00mm left over (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened both disc in rear (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both tyre rear (5.2.3 (d) (ii))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

engine sump corroded

engine sump corroded

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

engine oil sump pan corroding

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

engine oil sump pan corroding

Obligatory mirror slightly damaged Both n/s and o/s mirror casings cracked (3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Obligatory mirror slightly damaged Both n/s and o/s mirror casings cracked (3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Exhaust mounting defective (6.1.2 (a))

Emissions not tested (7.4.B.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp not working on main beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)