2002 Audi A2

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases At front of catalytic converter (6.1.2 (a))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear shocky dust cover adrift

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Macpherson strut mounting likely to fail (5.3.3 (b) (ii)) DANGEROUS

Front Suspension arm ball joint dust cover severely deteriorated n/s and o/s (5.3.4 (b) (i))

Front strut top bearing noisy

Nearside Front floor pan slightly damaged

Nearside Rear shock absorber dust cover adrift

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear axle corroded

Windscreen damaged but not adversely affecting driver's view scratched (3.2 (a) (i))

long parking brake lever travel

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated n/s and o/s (5.3.4 (b) (i))

Nearside Front floor pan slightly damaged

Nearside Rear shock absorber dust cover adrift

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear axle corroded

Windscreen damaged but not adversely affecting driver's view scratched (3.2 (a) (i))

coolant leak possible radiator

long parking brake lever travel

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Rear coil spring broken (2.4.C.1a)

Front Exhaust has a minor leak of exhaust gases possibly manifold or gasket (7.1.2)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Nearside Steering system slightly rough strut top bearing (2.2.D.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear seatbelts not tested

exhaust corroded

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Front Exhaust has a minor leak of exhaust gases possibly manifold or gasket (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Nearside Steering system slightly rough strut top bearing (2.2.D.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear seatbelts not tested

exhaust corroded

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Electrical wiring insecure (1.9.2a)

Nearside Front coil spring broken (2.4.C.1a)

damage to nearside front floor

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

damage to nearside front floor

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Front coil spring incomplete (2.4.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS