2002 Mazda MX-5

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Advanced corrosion both rear inner sills

advanced corrosion both outer sills rear arches

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

advanced corrosion both outer sills

Progressive corrosion on vehicle underside

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

corrossion on both front chassis

corrossion on o/s rear brake disc and pads low

front brake pads low

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

corrossion on both front chassis

corrossion on o/s rear brake disc and pads low

front brake pads low

Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both front and rear brake discs (surface rust) considered safe at time of test

rear suspension arms (dry rusty condition) considered safe at time of test

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion around rear cill (7.1.1 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced corroded on outer cill (7.1.1 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Oil leak ()

Front Front position lamp(s) not working both front (1.1.A.3b)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of the sill. (6.1.B.2)

Offside Front Steering rack gaiter insecure (2.2.D.2d)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Oil leak ()

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Seat belt anchorage prescribed area is excessively corroded both (5.2.6)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack insecure (2.2.B.1a)

Offside Front brake caliper has restricted free movement (3.5.1k) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp insecure (1.1.C.1c)

Offside Front brake caliper has restricted free movement (3.5.1k)

Offside Rear brake caliper has restricted free movement (3.5.1k)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)