2004 Yamaha DT125

Clutch lever shortened. (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Indicators flash fast.

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Slight binding of front brake.

Headlamp aim too high (1.6)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Clutch lever shortened. (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Indicators flash fast.

Left switch gear slightly loose.

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Slight binding of front brake.

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear position lamp missing (1.1.1a)

Rear Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Brake caliper(s) insecure (3.2.A1j) DANGEROUS

Rear Brake reaction bracket insecure (3.2.A1j) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering headbearing has slight free play (2.2.2)

Front Brake lever attachment screws missing (3.1.2b)

Front Wheel spoke excessively loose (4.2.1b)

Front suspension assembly component excessively misaligned (2.3.1)

Front wheel bearings have excessive free play (2.3.5b)

Rear Wheel spoke excessively loose (4.2.1b)

Rear mono-shock pivot excessively worn (2.4.B.4)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering headbearing has slight free play (2.2.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Offside Rear Footrest insecure (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake Lever Badly Bent

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly misaligned (2.3.1)

No.plate light missing.

Speedo bracket broken.

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Footrest missing (6.2.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake master cylinder fluid level dangerously low (3.2.B1d)

Rear Tyre is unsuitable (4.1.1)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Crack in rear no.plate.

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly misaligned (2.3.1)

No.plate light missing.

Oil tank feed pipe passes through suspension spring.

One top yoke clamp bolt missing.

Speedo assy. mounting broken.

Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Indicator tell tale not functioning (1.5.2)

Nearside Front Direction indicators not working (1.5.1c)

Offside Rear Direction indicator insecure (1.5.3b)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))