2005 Mercedes-benz Vito

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Body panel corroded and likely to cause injury Wheel arch (6.2.1 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate missing (0.1 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Underbody partially coated and slightly corroded where visible

Nearside Front Suspension component mounting repair covered in underseal chassy (5.3.6 (a) (i))

Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Offside Front Suspension component mounting repair covered in underseal chassy (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive under body and parts (5.3.6 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal chassy (5.3.6 (a) (i))

Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Offside Front Suspension component mounting repair covered in underseal chassy (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive under body and parts (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Prop shaft likely to become detached (6.1.7 (a) (ii)) DANGEROUS

Rear Brake pipe corroded, covered in grease or other material x 2 (1.1.11 (c))

under body corrosion and parts

Engine and under covers fitted

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Play in steering rack inner joint(s) ()

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases center pipe. (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

under body surface corrosion but solid at time of test.

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Stop lamp not working (1.2.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre worn close to the legal limit (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)