2005 Ford Transit

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step area (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush at rear of arm (5.3.4 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush at rear of arm (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

fuel tank breather pipe broken

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush at rear of arm (5.3.4 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush at rear of arm (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Steering linkage ball joint has slight play steering arm (2.1.3 (b) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced leg (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Steering linkage ball joint has slight play steering arm (2.1.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced leg (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill/door step areas holes within 30cms of seatbelt mounting point (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Brakes imbalanced across an axle weak/lazy (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sills/door step areas holed within 30cms of seatbelt mounting point (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X2 outriggers, fore and aft of rear wheel (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin inner (1.1.13 (a) (ii))

Nearside Play in steering rack inner joint(s) ()

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin inner (1.1.13 (a) (ii))

both rear tyres starting to wear low on edges

corrosion and repair patches throughout general underside

Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))

Nearside Rear sill panel corroded

Offside Rear sill panel corroded

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))

Nearside Rear sill panel corroded

Offside Rear sill panel corroded

Play in steering rack inner joint(s) ()

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded step (2.4.A.3)

Nearside Obligatory mirror missing (8.1.1)

Nearside Rear Body has a sharp edge caused by corrosion wheel arch corroded (6.1.C.1)

Offside Front Subframe mounting prescribed area is excessively corroded step (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded engine bay ,engine mount ,chassis leg corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded rear corner close to spring eye (2.4.A.3)

Play in steering rack inner joint(s) ()

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded in two places (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chaais out riger (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nail in offside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Spare tyre defective