MOT Status
ExpiredMileage
92,112 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush excessively worn front and rear bushes (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
slight play osf top strut mount
Corrosion on nearside and offside sills/floor.
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Position lamp not working (4.2.1 (a))
Corrosion on nearside and offside sills/floor.
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring broken (2.4.C.1a)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s front wishbone rear bush slight split
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front coil spring broken (2.4.C.1a)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
o/s front wishbone rear bush slight split
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Nail in nearside rear tyre
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CN56 MXG is a 2006 Ford Ka in Silver with a 1,297cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CN56 MXG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CN56 MXG?
You can check the full history of CN56 MXG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CN56 MXG registered?
CN56 MXG is a 2006 Ford Ka, first registered on 31 December 2006.
Is CN56 MXG safe to buy?
The MOT history for CN56 MXG shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CN56 MXG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN56 MXG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.