2008 Fiat Ducato

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Anti-roll bar linkage pin or bush excessively worn drop link (5.3.4 (a) (i))

Rear Leaf spring shackle pin or bush excessively worn both (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Central Brake pivot has restricted free movement park piviot (3.5.1k)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Side repeater missing (1.4.A.2b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Outer Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Side repeater not working (1.4.A.2c)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine management light on

Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension arm has excessive play in a pin/bush rear bush (2.4.G.2)

Nearside Headlamp aim too far to the right (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension arm has excessive play in a pin/bush rear bush (2.4.G.2)

engine management light on

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Side repeater adversely affected by the operation of another lamp (1.4.A.2h)

Offside Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Side repeater insecure (1.4.A.2b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)