MOT Status
ExpiredMileage
99,145 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill & chassis (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill & chassis (5.3.6 (a) (i))
Oil leak, but not excessive sump corroded (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill & chassis (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill & chassis (5.3.6 (a) (i))
Oil leak, but not excessive sump corroded (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive FLOOR TO INNER SILL AREA (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive FLOOR TO INNER SILL AREA (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Outer Drive shaft joint worn, but not excessively ns/os (6.1.7 (c) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor to inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive ns/os inner sill area (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Outer Drive shaft joint worn, but not excessively ns/os (6.1.7 (c) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor to inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive ns/os inner sill area (5.3.6 (a) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Registration plate lamp insecure (4.7.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Front both wiper blades deteriorated
Nearside Rear Nail in tyre ()
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both rear bushes (2.4.G.2)
both front tyres wearing on inner edge
Tyre worn close to the legal limit (4.1.E.1)
offside front tyre worn on inner edge
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CN58 LFY is a 2008 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CN58 LFY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CN58 LFY?
You can check the full history of CN58 LFY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CN58 LFY registered?
CN58 LFY is a 2008 Mazda 3, first registered on 9 October 2008.
Is CN58 LFY safe to buy?
The MOT history for CN58 LFY shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CN58 LFY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CN58 LFY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.