1982 Volkswagen Transporter

Front to rear brakes pipes covered in grease

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

front brake pipes covered in grease

rear brake pipes covered in grease

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seatbelt (6.2.2 (d) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Window in an unacceptable condition insecure (3.2 (c) (i))

Nearside Window in an unacceptable condition insecure on side of van (3.2 (c) (i))

Nearside Loading door likely to open inadvertently or not remain closed sliding door (6.2.3 (b) (ii)) DANGEROUS

Front Obligatory mirror slightly damaged both door mirrors (3.3 (b) (i))

Nearside Front Hazard warning tell-tale inoperative (4.9.1 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear All position lamps light intensity obviously reduced (4.2.3 (a) (i))

Nearside Rear Hazard warning tell-tale inoperative (4.9.1 (a) (i))

n/s and o/s mirrors view distorted

Exhaust has a major leak of exhaust gases rear (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth (3.1.5)

Windscreen washer provides insufficient washer liquid (8.2.3)

n/s and o/s mirrors view distorted

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Registration plate lamp not illuminating the registration plate dull (1.1.C.1e)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking points (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings trailing arm mountings (6.1.B.2)

Offside Front Brake pipe inadequately clipped (3.6.B.1)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point (6.1.B.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking points (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings trailing arm mountings (6.1.B.2)

Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth (3.1.5)

Rear fog lamp tell tale not working (1.3.1b)

Offside Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust system vibrating and making a noise

Nearside Front Vehicle structure has slight corrosion on inner wheel arch to seat mounting (6.1.B.2)

Offside Front Vehicle structure has slight corrosion floor (6.1.B.2)

Vehicle structure has slight corrosion (6.1.A.1)

Brake rod inappropriately repaired (3.5.1n)

Front wheel bearing has excessive play both (2.5.A.3c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe inadequately clipped (3.6.B.1)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

hard corrosion rear crossmember and inner rear lower quarters inner

hard corrosion rear under sill areas

underside of body heavily undersealed

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Vehicle structure has slight corrosion (6.1.A.1)

N/S/R Tyre has age cracks.

N/S/R Tyre has age cracks.

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Nearside rear brake binding (3.7.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

front brake binding (3.7.B.1)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Headlamp aim too high (1.8)

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Suspension component mounting prescribed area is fractured (2.4.A.3)

Offside Headlamp aim too high (1.8)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Rear Brake pipe inadequately clipped (3.6.B.1)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Steering component cracked and unserviceable (2.2.C.1d)

Fuel system component leaking (7.2.3) DANGEROUS

nearside front floor pan corroded but not within prescibed area

nearside lower doorstep fibre filled

offside front floor pan corrode but not within prescibed area

offside lower door step fibre filled

o/s/f and o/s/r brakes binding slightly †advise underbody of vehicle heavily coated with shutz inspection very dificult

Parking brake: efficiency below requirements (3.7.B.7)

Rear wheel bearing has excessive play (2.6.2)

Registration plate lamp not working (1.1.5c)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake binding (3.7.B.1)

rear brake grabbing severely (3.7.A.5b)

registration plate insecure (6.3.1b)

Rear wheel bearing has excessive play (2.6.2)