2002 Mazda 6

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside front brake binding (3.7.B.1)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

damage to offside rear tyre

Damage Zone B of screen

Engine under tray fitted

Front number plate loose but not liable to fall off

Offside & nearside rear inner sills corroded

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too high (1.8)

Offside Rear Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Damage Zone B of screen

Engine under tray fitted

Front number plate loose but not liable to fall off

Offside & nearside rear inner sills corroded

Offside rear brake pads appear low

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres on 1.6mm and bold on inner and outer edges

front brake pads look low

nearside rear tyre on 1.6mm

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)