2002 Ford Fiesta

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Exhaust emissions likely to be affected by an exhaust leak rear box has a big hole (8.2.2.1 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Central outer sill (7.1.1 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Side repeater insecure (4.4.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

NSF wind has heavy damaged

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

exhaust blow from a rear silencer repair

vehicle underside has corrosion

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

NSF wind has heavy damaged

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

exhaust blow from a rear silencer repair

vehicle underside has corrosion

Emissions not tested (7.3.A.1)

Front Exhaust has a major leak of exhaust gases flexi hose joint (7.1.2)

Nearside Steering rack gaiter split (2.2.D.2d)

Rear Body has slight corrosion (6.1.B.2)

n/s wing panel insecure

o/s/f wheel hub corroded

Nearside Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Registration plate lamp insecure (1.1.C.1c)

Nearside Side repeater insecure (1.4.A.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Emissions not tested (7.0)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Side repeater insecure (1.4.A.2b)

Nearside Rear Registration plate lamp insecure (1.1.C.1c)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres starting to perish in the thread area

nearside front wing insecure at the bottom

Emissions not tested (7.0)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Centre Brake pipe excessively corroded (3.6.B.2c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

surface corrosion throughout

Front brake disc excessively scored (3.5.1h)

surface corrosion throughout