2003 Ford Focus

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Seat belt retracting mechanism defective (7.1.2 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sil (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Registration plate inscription illegible (0.1 (b))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

body corrosion

rear suspension components slightly corroded

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

body corrosion

rear suspension components slightly corroded

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills (7.1.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both rear inner arches (7.1.1 (a) (i))

Suspension arm corroded but not seriously weakened all rear (5.3.3 (b) (i))

Body has slight corrosion (6.1.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Stop lamp not working (1.2.1b)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

manifold breather pipe split

All position lamps adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Headlamp not working on dipped beam (1.7.5a)

Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

manifold breather pipe split

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

offside rear wheel bearing is noisy

Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

offside rear wheel bearing is noisy

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake lining(s) wearing thin (3.5.1g)