2003 Ford Ka

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Outer sill (6.1.A.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Vehicle structure has slight corrosion Outer sill (6.1.A.1)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

n/s/r quater panel corroded/peeling = rear wiper blade required = front windscreen cracked outside swept area = some corrosion/peeling o/s/f inner wheel arch = some corrosion o/s/f brake pipe = some corrosio/peeling both rear inner sills

spare wheel missing (carrier insecure) = some wear/play both front top strut mountings = O/S/R TYRE APRX 3/4MM BALDING INNER EDGE = N/S/R TYRE VERY CLOSE TO LIMIT APRX 2MM = N/S/F TYRE VERY CLOSE APRX 2/3MM AND BALDING EDGES

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a) DANGEROUS

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a) DANGEROUS

n/s/r quater panel corroded/peeling = rear wiper blade required = front windscreen cracked outside swept area = some corrosion/peeling o/s/f inner wheel arch = some corrosion o/s/f brake pipe = some corrosio/peeling both rear inner sills

spare wheel missing (carrier insecure) = some wear/play both front top strut mountings = O/S/R TYRE APRX 3/4MM BALDING INNER EDGE = N/S/R TYRE VERY CLOSE TO LIMIT APRX 2MM = N/S/F TYRE VERY CLOSE APRX 2/3MM AND BALDING EDGES

Rear Brake pipe slightly corroded (3.6.B.2c)

underside of vehicle corroded

Corrosion to offside front inner wheel arch

FRont brake discs corroded/ worn

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front brake pads cannot be seen clearly

General underbody corrosion

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Handbrake travel

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise excess handbrake travel

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise excess handbrake travel

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)