MOT Status
ExpiredMileage
79,620 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Body insecure and dangerous to other road users (6.1.B.1b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Steering arm has relative movement at its fixings (2.2.B.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
offside wiper
Headlamp aim too far to the right (1.8)
Offside Front coil spring incomplete (2.4.C.1a) DANGEROUS
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
offside wiper
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
front brake application uneven (3.7.B.2)
front brake recording little or no effort (3.7.B.5a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
play o/s and n/s/f top suspension mountings.
wear to front brake discs.
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front constant velocity joint is slightly worn (2.5.C.1b)
Nearside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front constant velocity joint is slightly worn (2.5.C.1b)
Offside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside front brake juddering slightly (3.7.A.2b)
fuel filter corroded
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front constant velocity joint is slightly worn (2.5.C.1b)
Nearside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front constant velocity joint is slightly worn (2.5.C.1b)
Offside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside front brake juddering slightly (3.7.A.2b)
fuel filter corroded
Nearside Front Shock absorber has a slightly worn shock absorber pivot (2.7.4)
Offside Front Shock absorber has a slightly worn shock absorber pivot (2.7.4)
Nearside Rear Rear wheel bearing has excessive play (2.6.2)
Nearside Front Upper Shock absorber has a slightly worn shock absorber pivot (2.7.4)
Offside Front Upper Shock absorber has a slightly worn shock absorber pivot (2.7.4)
Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Upper Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CP03 VEM is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CP03 VEM, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CP03 VEM?
You can check the full history of CP03 VEM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CP03 VEM registered?
CP03 VEM is a 2003 Ford Ka, first registered on 30 June 2003.
Is CP03 VEM safe to buy?
The MOT history for CP03 VEM shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CP03 VEM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CP03 VEM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.